Smart Lighting by Humble
Control by app, voice, switch and sensors
Once you have added the Humble One Smart or the Humble Bee (or both) to your smart lighting system you can control it any way you want. You can seamlessly dim one lamp with the app or a smart switch. Group multiple lights or for example turn them on and off at a specific time or sundown. Another great possibility is to connect them to a motion sensor so they go on when you enter the hallway or bathroom.
For more info about setting up a smart lighting system have a look at Philips Hue: philips-hue.com
Everyone can be smart with our smart lights
The Humble One Smart and the Humble Bee make it very easy to create a nice atmosphere. It’s a great way to control multiple Humble lights at the same time. Just connect to your smart lighting system and off you go.
Connect to Hue, Ikea Tradfri, Tuya and more
Humble smart lights integrate seamlessly into your Zigbee 3.0 enabled smart home network so you can control it with your phone, voice, motion sensors or a physical wall switch.
If you are new to the world of smart lighting and don’t have a bridge yet we advise to start by getting the Philips Hue* bridge and app.
*Note that a smart Humble light will work with Hue but does not offer the full compatibilty of an original Hue lamp.
Make sure the lamp is charged and turn the lamp on using the on-off button on the bottom of the lamp.
When you turn on a Humble smart lamp for the first time it will automatically be in pairing mode for 3 minutes. The lamp will pulsate to indicate this. It can now be ‘found’ by your Hue/Tuya system and added to it.
To reactivate pairing mode for the Humble One Smart, turn off the lamp by pressing the button on the bottom. Then turn the lamp on and off three times in a row and finish with on. When the lamp starts pulsing, pairing mode is activated. Wait 10 seconds between each attempt.
To reactivate pairing mode for the Humble Bee, hold and press the + button on the bottom for 10 seconds. When the lamp starts pulsing, pairing mode is activated,
Make sure the lamp is charged and turn the lamp on by using the on-off button on the bottom of the lamp.
When you turn on a Humble One Smart for the first time it is automatically in pairing mode for 3 minutes. The lamp will pulsate to indicate this.
Put the Humble Bee in pairing mode by press and holding the + button on the bottom for 10 seconds.
After 3 minutes the lamp will shine normally and you can add it to your Trådfri system.
The Humble smart lamps use the Zigbee 3.0 protocol which requires a bridge. This technology is very energy efficient, that way we can combine good battery life and great smart functionality.
|Control by remote||Yes||No|
|Battery life||up to 140 hrs||up to 100 hrs|
|Function of bottom button on lamp||on/candle/ambient/work/off||on/off, activate pairing mode|
|Voice control via Google/Amazon||No||Yes|
|Control with wall switch or motion sensors||No||Yes|
If your system is based on Zigbee 3.0 it should normally work but still compatibility issues might occur with some systems. Feel free to contact us for more information if you have a different system.
If you just want to turn your lights on and off and select the intensity in three steps you could also use a remote control. Note that the remote always controls all Humble lights within its range (about 10 meters). If you have multiple Humbles in different rooms you might not want this. The Humble One Smart offers you the possibility to group lights together in different rooms and on top of that a whole range of possibilities such as automations and voice control via Google Assistant or Amazon Alexa.